Unsaturated resin plus curing agent| plus accelerator plus color paste mix evenly---"Bar workshop processing---"Bar blank---"Blank selection workshop---"Button making workshop and sheet workshop processing---"Slab special Buckle workshop—— express Polishing workshop Finished product workshop
A. The production process of bar material:
B, the production process of sheet material:
C. The function and standard of blank selection:
Eliminate non-conforming products before the next process
①The thickness of the billet is according to the company's requirements for the variety: the rod is ±{{0}}.2mm for the genuine product, and the plate ±0.1mm is for the genuine product (qualified product) and the excess is waste.
②The color and pattern are changed, and it is a waste product that does not meet the requirements of this variety.
③The model is poorly made, and the rotten edges, heart pulling, and bubbles are all waste products.
D. Button workshop production requirements and standards
①The shape is consistent with the sample, including the size of the thin edge buckle, the curvature of the face and back, etc.
②Inspection standards, the following phenomena are all waste products:
a. Eye of the needle: The eye of the needle is broken or cracked, the eye hole is not in the center of the button, the four holes are not square, the eye hole is not perpendicular to the button surface, there are few holes or the needle is not penetrated after the needle is broken, the front is large and the back is small, dark eyes Buttons, hole edges are fried, no holes, etc.
b. Button edge: one side is thick and one side is thin; the overall thickness of the button is correct, and one side is thick and one side is thin.
c. Compared with the sample button, the overall thickness of the button is thicker or thinner as a whole and four consecutive buttons are thick or thin during machine turning.
E. Acceptance criteria for finished products
a) Finished product standard
1. The color, pattern and model are the same as the sample or the product requirements.
2. The pinhole is correct and symmetrical, and the needle distance and the size of the pinhole meet the standard.
3. The luminosity meets the requirements.
4. There is no car frying, car breaking and uneven thickness of the sides.
5, according to the style, color, pattern, model classification and packaging.
